![]() |
![]() |
![]() |
||||||||||||||||||||||
Installation:Surface Preparation: Surface to be treated must be cleaned of any film, scale, loose material, oils, grease, dust, dirt, laitance, efflorescence, oil-based curing membranes or form release agents, paint, unsound concrete and any other material that will prevent penetration. Surface preparation may be accomplished by sand blast, water blast or chemical methods. Application: Apply DURIPAL–H to cool surfaces whenever possible. Apply either with spray, brush or roller. It is important that only as much DURIPAL–H as the surface will readily absorb is applied. Remove any excess solution before it crystallizes on the surface. Clean-Up: Clean equipment with water and a mild detergent. Precautions: All glass surfaces must be protected from contact with DURIPAL–H to prevent etching. Must be applied to a clean, dry, sound surface. DURIPAL–H cannot penetrate materials saturated with water. However, if saturated surfaces are permitted to dry out they may be successfully treated. Saturated surfaces or surfaces which do not absorb water by capillary action will not absorb DURIPAL–H. To prevent formation of a white film, limit application so that no free DURIPAL–H, characterized by a shiny or slick appearance, remains on the treated surface. Avoid applying DURIPAL–H to hot (over 100°F, 38° C) surfaces. DURIPAL–H reacts more quickly in the presence of heat. Surfaces heated by the sun must not be treated while still hot or the DURIPAL–H will polymerize before penetrating. DURIPAL–H must be stored at temperatures above freezing. Do not use on colored brick. CAUTION – FOR INDUSTRIAL USE ONLY:In accordance with federal regulations, do not apply unless Material Safety Data Sheet (MSDS) is available on-site. Consult MSDS before using this product. Product is highly alkaline. If contact with eyes or skin occurs, flush immediately with copious amounts of water and contact a physician. If swallowed, induce vomiting and CONTACT A PHYSICIAN IMMEDIATELY. WARRANTYThis product is warranted and guaranteed to be of good quality. Manufacturer, as its sole and exclusive liability hereunder, will replace material if proved defective. THIS WARRANTY AND GUARANTEE ARE EXPRESSLY IN LIEU OF ALL OTHERS, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND MAY NOT BE EXTENDED BY REPRESENTATIVES OR ANY PERSONS, WRITTEN SALES INFORMATION, OR DRAWINGS IN ANY MANNER WHATSOEVER. While the manufacturer recommends uses for the product based on tests believed reliable, no warranties, express or implied, or guarantee can be given as to particular methods of use or application, nor can performance be warranted, expressly or impliedly, or guaranteed under special conditions. Distributors, salespersons or company representatives are NOT authorized to extend or vary any warranties or guarantees beyond those outlined herein nor may the manufacturer’s or seller’s limitation of liability be waived or altered in any manner whatsoever.
home |
products |
restoration/repair |
project profiles
customer service | ask the engineer | contact us phone:215-425-6607 toll free:800-523-3834 email:info@ipasystems.com Copyright � 2009 IPA Systems, Inc. |
||||||||||||||||||||||||
![]() |
||||||||||||||||||||||||
![]() |
||||||||||||||||||||||||