 |
|
| Product Name |
Description |
| OCTOBLEN |
Acrylic latex bonding admixture for Portland cement base mixtures, scratch/brown coats, concrete patches, cement paints, slurry and finish coats. |
| OCTOWELD |
Liquid vinyl acetate polymer used as an easy spreading bonding agent for plasters and mortars. |
|
| Product Name |
Description |
| IPALASTIC |
100% Acrylic elastomeric coating for concrete or stucco |
| IPATOP COAT |
A two component polymer modified cementitious coating. Weatherproof coating for concrete or masonry |
|
| Product Name |
Description |
| IPANOL E-FLEX |
A 100% solids, two component low modulus of elasticity epoxy. Surface barrier for concrete decks in traffic bearing conditions. |
| IPANOL GEL |
A 100% solids, two component moisture insensitive epoxy used in situations requiring a high modulus and a low sag mortar consistency |
| IPANOL HBC |
A 100% solids, two component epoxy system to provide a high gloss architectural grade finish on concrete or masonry |
| IPANOL HIMOD |
A 100% solids, two component high modulus of elasticity epoxy for structural repairs. AASHTO M235-91, ASTM C881, Type 1, II, IV & V, Grade 2, Class B & C. |
| IPANOL LV |
A 100% solids, two component moisture insensitive low viscosity epoxy, AASHTO M235-91, ASTM C881, Type 1 & IV, Grade 1, Class B & C. |
|
| Product Name |
Description |
| IPATOP PENNGROUT |
A versatile high strength non-shrink grout for dry-pack, plastic, pumpable and pourable applications. |
|
| Product Name |
Description |
| DRYCON SM |
Waterproof structural repair mortar for pneumatic spray gun installation |
| DRYCON SMF |
DRYCON SMF is a polyethylene fiber reinforced addition to DRYCOM SM, and is recommended where exceptional crack and drying shrinkage resistance in a mortar is needed. |
| IPATOP DEEP PATCH |
A two-component cementitious polymer modified repair mortar for horizontal concrete surfaces. |
| IPATOP HES |
A one component cementitious shrinkage compensated repair mortar for High Early Strength applications |
| IPATOP HF |
A one component cementitious shrinkage compensated, flowable repair mortar for pour and pump applications |
| IPATOP RM |
A pre-mixed one component cementitious repair mortar for horizontal applications |
| IPATOP VO |
A two component repair mortar for vertical and overhead repair of concrete structures. |
| LEVELALL |
A single component self leveling repair mortar and floor topping. |
| LEVELALL PRIMER |
A solvent-free copolymer liquid that improves bond to substrates when applying LEVELALL Underlayment |
| OCTOCRETE |
A single component polymer modified repair mortar available in 15 minute and 30 minute set times. |
| OCTOCRETE U |
A single component polymer modified repair mortar for underwater use. |
| OCTOSKIM |
A two component kit for resurfacing horizontal concrete - minor spalling and surface uneveness. |
|
| Product Name |
Description |
IPANEX-R |
Fast setting hydraulic cementitious plug to stop flowing water in masonry and concrete |
|
| Product Name |
Description |
| DURIPAL |
A clear, odorless inorganic polymer for hardening and stabilizing cementitious building materials |
|
| Product Name |
Description |
| DRYCON |
A two coat cementitious kit used to prevent seepage of water through masonry and concrete |
| DRYCON SM |
Waterproof structural repair mortar for pneumatic spray gun installation |
| DRYCON SMF |
DRYCON SMF is a polyethylene fiber reinforced addition to DRYCOM SM, and is recommended where exceptional crack and drying shrinkage resistance in a mortar is needed. |
|
| Product Name |
Description |
| DURIPAL H |
A clear, odorless inorganic polymer for impregnating & waterproofing cementitious building materials |
| FARBERTITE |
A unique water based coal tar coating that provides exceptional adhesion, flexibility and corrosion protection for concrete, wood or steel construction components that may be exposed to aggressive environments, particularly in marine applications. |
|
|
 |